Rp 1.030.442.709
Item Code : #SPR0350087
Availability : In stock
Condition : New
PROLiNK Power I Series (3P/3P) three-phase input / three phase output, true online double conversion UPS System gaurantees to supply consistent and quality electrical power to protect wide rang of critical application such as data centres, Medical equipment, and call centres. Harmful effects of harmonic injection are eliminated with the employment of adaptive feed forward cancellation (AFC) technology. With a UPS system that reflects low harmonic distortion and high input power factor, it is able to lower installation costs by ultilizing smaller cables and breakers.
SKU | SPR0350087 |
Type | PRO733120ES |
MPN | PRO733120ES |
Weight | 290 Kg |
Brand | PROLiNK |
Kategori | Power Back Up |
Dimensi | 805 x 590 x 1320 mm |
Phase | 3-phase in / 3-phase out |
capacity | 120KVA/108KW |
Nominal Voltage | 3 x 400V (3Ph + N) |
Acceptable Voltage Range | +15 percent or 20 percent |
Frequency | 50 / 60 Hz +/- 5 percent |
Total Harmonic Distortion (THDi) | <1.5 percent @ 100 percent load, <2.0 percent @ 50 percent load load, <6.0 @ 10 percent load |
Current Limitation | High overload : PFC Limit (discharging batteries) |
Power Factor | 1.0 |
Nominal Voltage | 3 x 400V (3Ph + N) |
Precision Stationer | +/- 1 percent |
Precision Transitory | +/- 2 percent (load variation 100-0-100 percent ) |
Frequency | 50/60 Hz Synchronised +/- 4 percent With mains absent +/- 0.05 percent |
Max. Synchronisation Speed | 10 Hz/s |
Waveform | Pure Sinewave |
Total Harmonic Distortion (THDv) | <0.5 percent (Linear Load), <1.5 percent (Non-linear Load) |
Dynamic Recovery Time | 10ms. at 98 percent of the static value |
Admissible Phase Overload | 125 percent for 10Min., 150 percent for 60s |
Admissible total overload | 112.5 percent for 10 min., 135 percent for 60s |
Admissible Crest Factor | 3.2:1 |
Admissible Power Factor | 0.7 inductive to 0.7 capacitive |
Imblance Output Voltage @ 100 percent Unblanced Load | <1 percent |
Current Limit | High overload, short-circuit:RMS Voltage, High Crest-factor current : Peak Limit |
Static Bypass Type | Solid State |
Static Bypass Voltage | 3x400V (3Ph + N) |
Static Bypass Frequency | 50/60Hz |
Aditional Criterion | Microprocessor Control |
Transfer Time | Zero |
Admissible Overload | 400 percent for 10 sec. |
Transfer to Bypass | Immediate, for overloads above 150 percent |
Retransfer | Automatically Retransfer after alarm is clear |
Maintenance Bypass Type | Without Interruption |
Maintenance Bypass Voltage | 3 x 400V (3Ph + N) |
Maintenance Bypass Frequency | 50/60Hz |
Overall Efficiency (Line Mode) | 94 percent |
Built-in Battery Type (2x31) | - Back-up Time Battery (minutes):- |
Max. Charging Current | 188 A |
Dimension, D x W x H (mm) | 805 x 590 s 1320 |
Net Weight without batteries (KG) | 290 |
Net Weight w/built-inbatteries (KG) | - |
Alamat : Rukan CBD BLok E No.5 - Green Lake City - Jakarta Barat
Telp : +622154313933
Email : online@smartcomputerindo.com